Free shipping on all orders over $50
7-15 days international
30 people viewing this product right now!
30-day free returns
Secure checkout
77768003
Etrogo Car Battery Charger Intelligent for 12V 24V Lead Acid Battery with Screen Automatically 10A 250W It designed with a special intelligent microcomputer chip to controlling, and uses broadband pulse technology, battery detection circuit, and pulse charging technology The battery is charged through 5 fully automatic stages and provides multiple protections. Suitable for 12V or 24V, 3AH-200AH (AGM, GEL, MF, SLA, etc.) lead-acid batteries. Lithium batteries cannot be charged. Main Features: Intuitive Interface The charging indicator light, battery type indicator light and charging percentage LED screen can display the charging status and progress in real time, which is very intuitive 2 Charging Mode Available "Motor" is applicable to batteries from 3AH to 20AH, and "Auto" is applicable to batteries from 20AH to 200AH. Two different charging modes can be changed by simply pressing the button on the screen. Identification Automatically 12V 24V Battey The advanced microcomputer automatic management system automatically detects 12V/24V batteries. Mainly based on actual battery voltage. If the battery overdischarged, sometimes it cannot be correctly identified. Voltage identification range: 12V (10-14.5V); 24V (18V-29V) Stop Charging Automatically When fully Charged When fully loaded, the input current automatically drops to 0 A. During charging, the LED indicator and charging indicator light are on. After full load, the power indicator remains unchanged, and the loading indicator (charging) automatically turns off to avoid overload. Multiple Protection It has overheating protection, short circuit protection, reverse polarity protection, over-current and over-voltage protection, built-in cooling fan, and good cooling structure to achieve efficient heat dissipation. Wide applications Suitable for 12V or 24V, 3AH-200AH (AGM, GEL, MF, SLA, etc.) lead-acid batteries only. Lithium batteries cannot be charged. Please confirm your battery information before use the charger Parameters: Input: AC110V-250V, 50-60HzOutput: 12V/24VWorking current: 0-10A, automatically adjustableWork efficiency: 98%Voltage identification: 12V (10V-14.5V); 24V(18V-29V)Operating temperature: - 30 ℃ to+50 ℃Size (length × width × height): 17 * 13 * 7cmGross weight: 08kgInput cable length; 130 cm, output cable length: 50 cmThe alligator clip is made of thick anodized copper, which can reduce the oxidation of the clip in the air and prolong the service life of the clip Precautions: Make sure the articles are in good condition before use. No loose parts, broken wires or deformed appearance. If this is the case, do not use the chargerPlease check the battery information and battery status before use. If the battery OVER discharged and the battery voltage is too low, it may not be recognized and charged. In order to better maintain the battery, please ensure that the lead-acid battery is charged in timeIn order to better maintain the battery, if it is not used, please CHARGE it once a week to avoid completely drain the battery.Please Use in a well ventilated room. It is strictly prohibited to use it in humid, high temperature, flammable and explosive gas environment.It is forbidden to block the ventilation grille or use the charger when the built-in fan is not working.The charger is equipped with a 2-pin US plug, which needs to be connected to the power supply to work. It has no energy storage function and cannot be used as a mobile power supply. Precautions: Make sure the articles are in good condition before use. No loose parts, broken wires or deformed appearance. If this is the case, do not use the chargerPlease check the battery information and battery status before use. If the battery OVER discharged and the battery voltage is too low, it may not be recognized and charged. In order to better maintain the battery, please ensure that the lead-acid battery is charged in timeIn order to better maintain the battery, if it is not used, please CHARGE it once a week to avoid completely drain the battery.Please Use in a well ventilated room. It is strictly prohibited to use it in humid, high temperature, flammable and explosive gas environment.It is forbidden to block the ventilation grille or use the charger when the built-in fan is not working.The charger is equipped with a 2-pin US plug, which needs to be connected to the power supply to work. It has no energy storage function and cannot be used as a mobile power supply.
Widely applications pulse charger,designed for 12V or 24V dry battery, water battery, lead acid, maintenance-free battery, etc(no charge lithium battery).automatic stop when fully charged, working current adjust automaticlly via 5 stage charging proces,charging and maintain the battery at the same time
Two Charging mode & 5-stage charging Motorcycle mode(MOTO) is suitable for 6AH to 20AH batteries; Car mode(AUTO) is suitable for 20AH to 200AH batteries; one button change enter 2 modes
Auto-recognition 12V/24V Built-in intelligent chip is able to identify 12V or 24V battery automatically once connected, Clear LED bar screen display the charging rate,easy to understand the charging
Auto stop charging function the input working current will be zero and then enter the maintain mode when fully charged,without worring about over charged.Percentage led screen tell the charging process in real time
Multi-protections & Warranty Overheating protection, short-circuit protection, reverse-connection protection,over current and over pressure protection;built-in silent cooling fan realize high efficient heat dissipation and energy saving. 12 months guarantee. Any problems, please contact seller directly .